Concrete Slabs in Ocala, FL
From foundation slabs and garage floors to shed and equipment pads, CSP Concrete builds reinforced, properly cured slabs across Ocala and Marion County — built for the Florida climate and the load they carry.
Slabs done right
A solid slab starts with the ground under it
CSP Concrete pours the slabs your project sits on — foundation slabs, garage slabs, shed pads, equipment pads, room additions, and AC or generator pads. We're a licensed Marion County, FL concrete crew (Marion County, FL License #18069), and we build every slab the same way: a compacted base, the right reinforcement, proper thickness for the load, and curing that respects Ocala's heat and rain.
Whether you need a single equipment pad or a full foundation slab for an addition, you get an honest, written estimate and a slab built to last.
Foundation slabs
Monolithic and turn-down foundation slabs for new construction, room additions, and outbuildings — engineered for the load and the soil.
Garage slabs
Thick, reinforced garage floors that handle vehicle weight, tool storage, and daily traffic without cracking or settling.
Shed & storage pads
Level, durable pads for sheds, workshops, and storage buildings so your structure sits solid for the long haul.
Equipment pads
AC, generator, and machinery pads sized and reinforced to carry the equipment and keep it stable.
Room additions
New slabs tied into your existing structure for sunrooms, additions, and enclosures — formed and finished to match.
AC & generator pads
Compact, code-conscious pads that keep your equipment off the ground, draining properly, and rated for the weight.
What's included
What's included in every slab
No shortcuts and no surprises. Every CSP Concrete slab is built with the same fundamentals, sized and detailed for your specific project.
Site grading & compacted base
We clear, grade, and compact the sub-base so the slab sits on solid, well-drained ground — the foundation of a slab that lasts.
Vapor barrier where needed
A poly vapor barrier under enclosed and conditioned slabs to keep ground moisture from migrating up through the concrete.
Rebar or wire mesh reinforcement
Steel rebar or welded wire mesh placed for the load — added strength that helps the slab resist movement and cracking.
Proper thickness for the load
Slab thickness matched to how the surface will be used, from light shed pads to heavy garage and equipment slabs.
Formed edges & turn-downs
Clean formed edges and thickened turn-down footings where the slab carries walls or structural weight.
Control joints
Planned control joints that guide where the concrete cracks as it cures, keeping the surface clean and predictable.
Broom or smooth finish
A broom finish for traction or a smooth trowel finish where you want it clean — your call, done right either way.
Proper curing
Florida-climate curing that protects the pour from heat and rain so the slab reaches full strength the right way.
Common projects
Common slab projects we pour
If it's a flat, reinforced concrete surface that has to carry weight, it's in our wheelhouse. Here's what homeowners and businesses across Marion County call us for most.
New foundation slabs
Solid, reinforced foundations for homes, additions, and outbuildings across Ocala and Marion County.
Ocala & Marion CountyGarage & carport floors
Heavy-duty slabs built to take vehicles, lifts, and gear without surface failure.
Ocala & Marion CountyShed & workshop pads
Level pads that keep sheds, barns, and workshops dry and square for years.
Ocala & Marion CountyEquipment & generator pads
Sized pads for AC units, standby generators, and machinery.
Ocala & Marion CountyPatio & enclosure slabs
Structural slabs under screen rooms, lanais, and covered patios — tied to the existing build.
Ocala & Marion CountyTear-out & repour
We remove failed or cracked slabs and pour a properly built replacement in their place.
Ocala & Marion CountyNeed driveways, sidewalks, or patios instead?
Flat concrete surfaces like driveways, walkways, sidewalks, and patios live on our flatwork page — same crew, same standards.
How it works
Our slab process, start to finish
Clear steps, clear communication. You always know what's happening and when your slab will be ready.
Free on-site estimate
We come out, measure, look at the soil and drainage, and talk through how you'll use the slab. You get a clear written quote — no pressure.
Prep & forming
We grade and compact the base, set forms and turn-downs, lay the vapor barrier where needed, and place rebar or wire mesh.
Pour & finish
We pour, screed, and finish the slab with a broom or smooth finish, then cut control joints to manage cracking.
Cure & cleanup
We cure the slab for Florida heat and rain, clean up the site, and let you know when it's ready to build on or use.
Slab FAQ
Concrete slab questions, answered
Straight answers to the questions we hear most about thickness, reinforcement, curing, and cracking.
How thick should my concrete slab be?
It depends on the load. Shed and patio pads are commonly around 4 inches, while garage floors, equipment pads, and slabs carrying heavier weight are poured thicker. We size every slab to how you'll actually use it.
Do you reinforce slabs with rebar or wire mesh?
Yes. Every structural slab gets steel reinforcement — rebar or welded wire mesh — placed for the load. Reinforcement helps the slab resist movement, spread weight, and hold together as it cures.
How long before I can build on or park on a new slab?
You can usually walk on a slab within a day or so, but it keeps gaining strength over time. We'll tell you exactly when your slab is ready for building, vehicles, or equipment based on the mix and conditions.
Will my slab crack, and what do control joints do?
Concrete naturally shrinks as it cures, so some hairline cracking is normal. We cut control joints at planned spots to steer cracks where they belong — keeping them straight, clean, and out of sight rather than random across the surface.
Free estimates · No pressure
Ready to pour new concrete in Ocala?
Tell us about your driveway, slab, patio, or sidewalk project. We'll measure the site, walk you through finish options, and send a clear written estimate — usually within a day or two.